Red Copper High Purity Charonde Pot Distillation Equipment Automatic Wine Making Stills

Red Copper High-Purity Charonde Pot Distillation equipment Automatic Wine Making Stills

Brandy distill is a special equipment for extracting high quality spirits (such as brandy) from the original wine with grapes or other fermented fruits by the method of discontinuous distillation. The treatment method can be set manually or automatically to extract high-purity alcohol with reasonable temperature, volatility, and to separate the head, middle and tail as required.

Brandy Distill is composed of preheater, distiller, condenser, pipeline and control system etc.

Methode charantaise distill equipment is a kind of discontinuous distillation equipment, which is mainly used for distilling and fermenting wine and fruit wine to produce brandy and other spirits (whisky, tequila, etc.) by extracting high-purity alcohol.

Methode charantaise distill equipment adopts the thermal concentration method Its heating temperature and time can be set manually or automatically. The liquor head, liquor middle and liquor tail can be separated according to the requirements.

heating model can be heat by electrical or steam .

Working principle of kettle distiller (charlander kettle distiller):

Distilling kettle:

The pot body is welded into a whole by the conical shape of the lower part and the upper part, the spherical bottom of the upper convex part and the top cover of the elliptical head. The top side of the pot is equipped with a safety valve, a liquor inlet pipe, and a cleaning and blowdown valve and a liquid level meter.

A reflow retort (also known as gooseneck cap) is installed in the middle of the top of the pot, which is welded with copper plate. The top of reflux retort is connected with preheater through gooseneck.

In the first distillation, add enough steam to the distilling kettle and preheater, heat the distilling kettle, and the alcohol vapor from the distilling kettle enters from the lower part of the reflux retort, gradually rises, and then flows through the gooseneck to the goose head part of the gooseneck, and finally from the gooseneck to the preheater through the connecting pipe (in this case, close the connecting channel between the gooseneck and the condenser). When the preheater temperature reaches 60 ℃, close the gooseneck. The connecting channel between the neck pipe and the preheater is opened, and the connecting channel between the gooseneck pipe and the condenser is opened. The alcohol steam enters the condenser from the upper part of the condenser through the connecting pipe. The cooling water enters from the bottom of the condenser, flows out from the upper part of the condenser, and cools the alcohol steam outside the pipe. Cooling water (generally lower than 10 ℃, preferably about 4 ℃), tank temperature is controlled at 30 ℃, and alcohol vapor flows through the condensate produced by the snake tube layer by layer, and finally flows out to the container for storage. The volume of alcohol produced in the first distillation is 28-32%. When the reflux temperature of the distillation pot reaches 90 ℃, the volume of alcohol distilled is less than 25% (determined by the process), the distillation is completed. Open the blowdown valve of the distillation kettle, close the blowdown valve after the residual liquid is discharged, flow the liquor from the preheater to the distillation kettle automatically, pump the liquor to be steamed to the preheater, and the next cycle begins.

After the first distillation, carry out the second or third distillation with the gentle heating as described above, and obtain the strong liquor .
 

1. Polishing:
Polishing is vital for tanks. Tanks should be polished wholly inside and outside.
Therefore it can ensure there is no place for the bacteria to hide in tanks.
Our polishing system consists of auto and semi-auto polishing machine and manual polishing.
Each tank is polished three times and more polish for the key place.
2. Welding:
Our argon central system for welding provides 100% pure argon to protect tanks from distorting during welding

SERVICE

We have established some overseas agent office to make the after-sales serivce already ,so it can will be service client in fast response .also in our headquarter service team ,there is a expert team which can support client in 7*24 hours .

1. Customer inquiry and consultation (URS documents)

2. Confirmation of treatment plan (DQ documents &PID Drawing)

3. Quotation offer with the technolgy document (Quotation PI )

4. Engineering and Manufacturing (Prodcution &Quality inspection )

5. Product inspection (FAT documents)

6. Delivery arrangement and loading work (full set Shipment documents)

7. After-sales service (OQ,PQ ,SAT documents)

FAQ:

1. What about your factory?

Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.

2. How will your company control the equipment quality ?

We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .

3. How long the warranty will be?

We provide 1 years warranty for the machine running ,but we will afford whole -life service for the machine .

4. Which kind payment do your company do now ?

We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.

5. Can we become your distributor in our country?

Yes, we very welcome you! More details will be discussed if you are interested in being our agent.

6. Why we choose "JOSTON "?

1. We enhance the reliability of product's quality and working life .

2. We decrease the consumption cost of the product in the ruuning.

3. We improve research personnel's ability to deliver a creative design;

4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.

7. Do you supply installation equipment in oversea?

Yes, if need, we can send our engineer to your plant to help you do installation and commission.

8. Do you supply installation equipment in oversea?

Yes, if need, we can send our engineer to your plant to help you do installation and commission.

9. How can we know the order production status ?

We will arrange the person to take photo or video during manufacturing in every week to make you to know the production status.When goods are finished,we will take detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here

10. What is kind service do you offer before making order ?

1. according to your company URS ,we will make the design drawing accoridingly.

2. after your company approved drawing ,we will make quotation.

3. final we make agreement on payment terms ,delivery time ,package ,shipment etc.

11. how about your company after-sale serivce ?

1. We provide long-term after-sale service.

2. we can do installation and commission for the equipment in your plant if necessary .

3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.