Product Details:
|
Type: | Evaporator/Crystallizer | Warranty: | 1 Year |
---|---|---|---|
OEM: | Parameter Customization | Material: | Titanium |
Heating Model: | Steam/hot Oil/hot Water/electrical | Function: | Remove Water Or Solvent From The Wastewater/effluent Water |
Core Components: | All Contact Product Use The Titanium | Key Selling Points: | Titanium Evaporator ,anti-acid Corrosion Evaporator |
Feeding: | Wastewater Which Including The High Degree Acid Solution | Output: | Liquid/semi-ointment +water(solvent ) |
Keywords: | Wastewater Evaporation/Saltwater Evaporator/Evaporator For Wastewater TreatmentWastewater Evaporators Manufacturer/Wastewater Treatment Equipment | Applicable Industries: | Electronic Industry, Pharmaceutical Plant,food&dairy Plant ,enviromental Engineering,printed Circuit Board, Precious Metal Recovery, Film Photocopying, |
High Light: | decompression titanium evaporator industrial,hot oil heating evaporator industrial,anti corrosion multi effect evaporator |
Decompression Titanium Anti-Corrosion Evaporator Concentration Industrial Multi Effect Wastewater Treatment
Effluent Water Evaporator Machine is suitable for waste water that is not suitable for biological , chemical or membrane treatment, such as high salt waste water, electroplating waste water, printing and dyeing waste water, garbage percolate, paper black liquid, flue gas desulfurization waste liquid, garbage incineration, gas recovery liquid, etc.; some high value-added production enterprise waste water has resources that need to be recovered, such as electronic industry, printed circuit board, precious metal recovery, film photocopying, etc. , this device is also available.
Effluent Water Evaporator Machine Structural features:
1. Effluent Water Evaporator Machine is composed of heater, evaporator, condenser, water collecting tank, defoamer, transfer pump, drainage pump, etc.
2. Effluent Water Evaporator Machine is made of anti-corrosion materials according to the characteristics of wastewater or sewage.
3. The waste water can meet the standard once or be used as the pretreatment measure of the subsequent process. Some of the waste water can be reused after evaporation to save the cost of tap water.
4. Vacuum decompression operation is adopted to increase the temperature difference of evaporation and increase the production capacity of evaporation intensity.
5. Multi effect evaporation is adopted, the secondary steam can be reused, with remarkable energy saving effect, convenient operation and simple installation.
6. Effluent Water Evaporator Machine structure is compact, the area of the station is small, and the configuration of each instrument valve is reasonable and convenient for operation.
7. Effluent Water Evaporator Machinematerial can be used Titanium material
8. evaporation water capacity can reach 0.5t/h ~ 10t / h.
9. Effluent Water Evaporator Machine can run automatically through PLC control and can run continuously and stably for a long time.
10. The cleaning cycle depends on the actual situation. Materials with high hardness need to be pretreated or the cleaning cycle should be shortened. The main equipment shall be equipped with cleaning nozzles. The cleaning solution can be clean water or dilute acid according to the actual situation.
Because of its strong anti-corrosion ability, long service life of heat exchanger and evaporator, and low maintenance cost in use, titanium is widely used in all kinds of seafood breeding, seawater heat exchange, brine heat exchange, chemical industry, metallurgy, refrigeration, light industry, electroplating industry, aluminum oxidation tank, salt making, paper making, ultrasonic, electronic communication, central heating and other industries and fields.
In the pharmaceutical industry, because the production of drugs is inseparable from acid, alkali and salt, pharmaceutical equipment is vulnerable to corrosion and damage. The use of steel equipment not only can not solve the problem of serious equipment corrosion, but also cause a lot of human, material and financial losses, affecting the normal production. Using titanium evaporator can solve this problem.
What is pure titanium evaporator? Pure titanium evaporator is a kind of evaporator. Why is it called pure titanium evaporator? The main reason is that the pure titanium evaporator is composed of titanium heat exchanger and titanium heater. In other words, the whole set of evaporator equipment is basically made of titanium.
Titanium -- chemical properties of titanium
In chemical properties, titanium shows good stability and corrosion resistance in a variety of industrial solutions.
Industrial pure titanium can be widely used in organic compounds, alkali solution, salt solution and other media, and it is not easy to react with it, and has excellent corrosion resistance; Pure titanium has good corrosion resistance to low concentration of hydrochloric acid, sulfuric acid, nitric acid and other inorganic acids at room temperature.
Pure titanium heat exchanger uses titanium material, because metal ions are not easy to lose, so it can make full use of this non-magnetic characteristics, and can be used as heat exchanger and evaporator for pharmaceutical and food and other special purposes
Titanium as heat exchanger and evaporator has the following advantages
1. Titanium has high specific strength and small equipment volume and weight;
2. Titanium has good corrosion resistance, even aqua regia can't corrode it, so the tube wall can be designed thinner, which helps to improve the heat transfer efficiency;
3. Because of the small wettability of liquid to titanium, the condensation mode on its surface is dropwise condensation. In this way, the heat transfer surface is renewed continuously and the heat transfer coefficient is greatly increased;
4. Titanium surface is smooth, easy to clean, not easy to produce dirt.
Therefore, titanium evaporator and titanium heat exchanger are good evaporation and heat exchange equipment.
SERVICE
We have established some overseas agent office to make the after-sales serivce already ,so it can will be service client in fast response .also in our headquarter service team ,there is a expert team which can support client in 7*24 hours .
1. Customer inquiry and consultation (URS documents)
2. Confirmation of treatment plan (DQ documents &PID Drawing)
3.Quotation offer with the technolgy document (Quotation PI )
4.Engineering and Manufacturing (Prodcution &Quality inspection )
5. Product inspection (FAT documents)
6. Delivery arrangement and loading work (full set Shipment documents)
7. After-sales service (OQ,PQ ,SAT documents)
FAQ:
1. What about your factory?
Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.
2. How will your company control the equipment quality ?
We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .
3. How long the warranty will be?
We provide 1 years warranty for the machine running ,but we will afford whole -life service for the machine .
4. Which kind payment do your company do now ?
We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.
5. Can we become your distributor in our country?
Yes, we very welcome you! More details will be discussed if you are interested in being our agent.
6. Why we choose "JOSTON "?
1. We enhance the reliability of product's quality and working life .
2. We decrease the consumption cost of the product in the ruuning.
3. We improve research personnel's ability to deliver a creative design;
4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.
7. Do you supply installation equipment in oversea?
Yes, if need, we can send our engineer to your plant to help you do installation and commission.
8. Do you supply installation equipment in oversea?
Yes, if need, we can send our engineer to your plant to help you do installation and commission.
9. How can we know the order production status ?
We will arrange the person to take photo or video during manufacturing in every week to make you to know the production status.When goods are finished,we will take detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here
10. What is kind service do you offer before making order ?
1. according to your company URS ,we will make the design drawing accoridingly.
2. after your company approved drawing ,we will make quotation.
3. final we make agreement on payment terms ,delivery time ,package ,shipment etc.
11. how about your company after-sale serivce ?
1. We provide long-term after-sale service.
2. we can do installation and commission for the equipment in your plant if necessary .
3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.
Contact Person: Mr. Charlie Tao
Tel: 0086-13957781390
Fax: 86-577-86717290