Suspension Mixing High Shear 13 Gallon Stainless Steel Pharmaceutical Tanks

Stainless Steel Suspension Mixing Tank With High Shear For Pharmaceutical

Stainless Steel Suspension Mixing Tank With High Shear For Pharmaceutical is used to to dissolve one or more materials (water-soluble solid phase, liquid phase or colloidal substance, etc.) in another liquid phase, and make them hydrate into relatively stable emulsions.

high shear emulsifying Mixing tank working principle :

The centrifugal high-speed emulsifying head can produce a huge rotating suction force when it works. The material directly above the rotor is rotated and sucked down, and then it is thrown to the stator at high speed. After the high-speed shearing, collision and smashing between the rotating stators, the material is collected to the outlet and ejected. At the same time, the anti vortex baffle at the bottom of the tank converts the rotating force into the up and down overturning force, so that the materials in the tank are evenly mixed, and the powder is prevented from accumulating and agglomerating on the liquid surface, so as to achieve the purpose of hydration and emulsification.

high shear emulsifying Mixing tank Application scope:

1. Food and beverage: dairy products, ice cream, chocolate, soymilk, juice, jam;

2. cosmetics industry: detergent, conditioner, shampoo, skin lotion, perfume;

3. pharmaceutical industry: injections, medicine emulsion, medicine cream, health care products, medicine slurry preparation;

4. chemical industry: lubricating oil, grease, heavy oil emulsification, diesel emulsification, disinfectant, insecticide, photosensitive latex, rubber slurry, resin paste, thickener, essence, silicon material, carbon black, Magnesium Oxide, titanium dioxide, anti sticking agent, release agent, defoaming agent, sealant, etc.

high shear emulsifying Mixing tank Characteristic:

1) Volume we can produce from 50L ---10000L.

2) Material we can use SS304 and SS316L. etc.

3) it can used in single layer or double jacket layers.

4) Jacket can be used different type : single full jacket ,limpet coil jacket and dimple type jacket.

5) Jacket can be used for heating and cooling.

6) top mounted high shear emulsify type agitator model .

7) Insulation material can use mineral wool ,rock wool ,PUF etc.

8) Tank can be equipped with manhole ,CIP spray ball ,vent filter level sensor ,temperature sensor ,pressure sensor ,load cell ,PH sensor ,PO2 sensor ,safety valve,sampling valve etc.

9) Tank can be CIP/SIP online

10) inside shell mirror polish Ra<0.4um ,outside shell polish Ra<0.8um

Why choose us:

1. through our perfect design,manufacturing and after-sale service,ensure that the production the effective use period.
2. Give full play the design performance indicators.
3. Offer you from technical design to equipement manufacturing and installation and debugging integration service.

 
FAQ:
 
1.What about your factory?
Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.
 
2.How will your company control the equipment quality ?
We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .
 
3.How long the warranty will be?
We provide 1 years warranty for the machine running ,but we will afford whole -life service for the machine .
 
4.Which kind payment do your company do now ?
We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.
 
5.Can we become your distributor in our country?
Yes, we very welcome you! More details will be discussed if you are interested in being our agent.
 
6.Why we choose "JOSTON "?
1. We enhance the reliability of product's quality and working life .
2. We decrease the consumption cost of the product in the ruuning.
3. We improve research personnel's ability to deliver a creative design;
4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.
 
7.Do you supply installation equipment in oversea?
Yes, if need, we can send our engineer to your plant to help you do installation and commission.
 
8.Do you supply installation equipment in oversea?
Yes, if need, we can send our engineer to your plant to help you do installation and commission.
 
9.How can we know the order production status ?
We will arrange the person to take photo or video during manufacturing in every week to make you to know the production status.When goods are finished,we will take detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here
 
10.hat is kind service do you offer before making order ?
1.according to your company URS ,we will make the design drawing accoridingly.
2.after your company approved drawing ,we will make quotation.
3. final we make agreement on payment terms ,delivery time ,package ,shipment etc.
 
11.how about your company after-sale serivce ?
1. We provide long-term after-sale service.
2. we can do installation and commission for the equipment in your plant if necessary .
3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.