|
Product Details:
|
| Marketing Type: | New | Type: | Stainless Steel Mixing Tank And Storage Tank |
|---|---|---|---|
| Warranty: | 1 Year | After Warranty Service: | Online Support/visit Client's Plant Site |
| Local Service Location: | Agent Is Available If Have Local Office | After-sales Service Provided: | Online Support/visit Client's Plant Site |
| OEM: | Parameter Customization | Material: | 304/316L Stainless Steel |
| Heating Model: | Steam/hot Water/electrical | Function: | Mixing The Pharmaceutical APIs With WFI Water To The Sterlie Injection Solution |
| Core Components: | Mixing Tank -filter --holding Tank | Key Selling Points: | High Effective Mixing Tank /sanitary Mixing Machine |
| Feeding: | APIs /liquid+ Water (solvent) | Output: | Injection Liquid Solution |
| Keywords: | IV Infusion Liquid Mixing Tank /injection Solution Preparation Vessel | Applicable Industries: | Pharmaceutical And Bio-pharma |
| High Light: | SS304 Stainless Steel Pharmaceutical Tanks,100L Stainless Steel Pharmaceutical Tanks,0.37KW stainless steel storage containers |
||
stainless steel pharmaceutical IV infustion solution injection solution mixing tank in GMP standard
stainless steel pharmaceutical IV infustion solution injection solution mixing tank in GMP standard for the pharmaceutical solution in FDA stadanrd is used to WFI water with Pharmaceutical APIs together according to the technological proportions. Which can be used in the infusion water ,injection solution etc ,the tank is designed company with CIP/SIP system ,can be PLC automatic control the whole production process .
The structure and configuration of stainless steel pharmaceutical IV infustion solution injection solution mixing tank for the pharmaceutical solution in FDA stadanrd can be standardized and humanized according to the requirements of production process. In the mixing process, it can realize the feed control, discharge control, mixing control and other manual and automatic control.
stainless steel pharmaceutical IV infustion solution injection solution mixing tank for the pharmaceutical solution in FDA stadanrd is composed of mixing tank body, upper and lower heads, agitator, support, transmission device, shaft seal device, etc. heating device or cooling device or metering device can also be configured according to process requirements.
stainless steel pharmaceutical IV infustion solution injection solution mixing tank can be used for the low viscosity solution like infusion solution ,injection solution ,eyedrop solution ,syrup solution ,oral liquid etc
stainless steel pharmaceutical IV infustion solution injection solution mixing tank Nozzle configuration:
The process nozzles mainly include manholes, inlets, outlets, sight glass, sight lights, vent filter, CIP (equipped with sanitary universal cleaning balls), SIP ports, sterile sampling ports, thermometers, temperature sensors, jacket inlets and outlets.(Nozzle size and opening position shall be provided according to process requirements.)
stainless steel pharmaceutical IV infustion solution injection solution mixing tank Characteristic:
1) Volume we can produce from 50L ---20000L.
2) Contact Product Material is SS316L.Non-Contact part material is SS304 etc.
3) Jacket can be used different type : single full jacket ,limpet coil jacket and dimple type jacket.
4) Jacket can be used for heating and cooling .
5)Heating medium is steam or hot water or electrical
6)cooling medium is chiller or tap water
7) agitator type :can be top mounted propeller type agitator or bottom mounted magnetic agitator
8) Insulation material can use mineral wool ,rock wool ,PUF etc.
9) Tank can be equipped with manhole ,CIP spray ball ,vent filter level sensor ,temperature sensor ,pressure sensor ,load cell ,PH sensor ,PO2 sensor ,safety valve,sampling valve etc.
10) Tank can be CIP/SIP online.
11) control panel :PLC /HMI automatic control or common button control .
12) inside shell mirror polish Ra<0.4um ,outside shell polish Ra<0.8um.
| Components Item | Function and usage |
| CIP spray ball | Wash &clean tank inside surface and devices automatic ,which should connect to the CIP machine station |
| Vent filter | Filter air to prevent the bacteria into the tank ,also can release the tank inside pressure. |
| Temperature sensor (gauge) | Indicate inside tank temperature and PID temperature control with the necessary valve and fittings |
| Pressure sensor (gauge) | Indicate the inside tank pressure |
| PH sensor | Indicate the product PH data |
| PO2 sensor | Indicate the product Oxygen content |
| Level sensor (gauge) | Indicate the inside tank product level height ,there are have different models :(static) pressure type ,ultrasonic type ,radar type ,glass tube type ,plate sight glass type . |
| Load cell | Indicate the product weight |
| VFD ( inverter ) | Control and adjust agitator speed |
| Safety valve | Release inside tank pressure to protect the tank safety |
| Flow meter | Indicate the solution inlet and outlet volume |
| Sight light | Indicate inside tank bright for watching easily |
| Manhole (handhole ) | Charge solid product into tank ,also can be used for maintenance inside tank components. |
| Sampling valve | Take inside tank products sample for offline checking |
Technology data for stainless steel pharmaceutical IV infustion solution injection solution mixing tank in two different type agitator system :
| Model | BT-50 | BT-100 | BT-500 | BT-1000 | BT-6000 | ||||
| Tank work volume:L | 50 | 100 | 500 | 1000 | 6000 | ||||
| Motor power for bottom mounted magnetic agitator :Kw | 0.18 | 0.37 | 1.1 | 2.2 | 5.5 | ||||
| Agitator speed for bottom mounted magnetic agitator :RPM | 0-350 ( for the gear motor connection type ),0-600 (for direct motor connection type ) | ||||||||
| Motor power for top mounted propeller type agitator :Kw | 0.37 | 0.55 | 1.1 | 1.5 | 7.5 | ||||
| Agitator speed for top mounted propeller type agitator :RPM | 0-150 | ||||||||
| Inside shell pressure MPa | -0.1/0.3 (can be done as client’s URS) | ||||||||
| Jacket pressure MPa | 0.3 (can be done as client’s URS) | ||||||||
Why choose us:
FAQ:
1.What about your factory?
Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.
2.How will your company control the equipment quality ?
We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .
3.How long the warranty will be?
We provide 1 years warranty for the machine running ,but we will afford whole -life service for the machine .
4.Which kind payment do your company do now ?
We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.
5.Can we become your distributor in our country?
Yes, we very welcome you! More details will be discussed if you are interested in being our agent.
6.Why we choose "JOSTON "?
1. We enhance the reliability of product's quality and working life .
2. We decrease the consumption cost of the product in the ruuning.
3. We improve research personnel's ability to deliver a creative design;
4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.
7.Do you supply installation equipment in oversea?
Yes, if need, we can send our engineer to your plant to help you do installation and commission.
8.Do you supply installation equipment in oversea?
Yes, if need, we can send our engineer to your plant to help you do installation and commission.
9.How can we know the order production status ?
We will arrange the person to take photo or video during manufacturing in every week to make you to know the production status.When goods are finished,we will take detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here
10.what is kind service do you offer before making order ?
1.according to your company URS ,we will make the design drawing accoridingly.
2.after your company approved drawing ,we will make quotation.
3. final we make agreement on payment terms ,delivery time ,package ,shipment etc.
11.how about your company after-sale serivce ?
1. We provide long-term after-sale service.
2. we can do installation and commission for the equipment in your plant if necessary .
3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.
Contact Person: Mr. Charlie Tao
Tel: 0086-13957781390
Fax: 86-577-86717290
