SS2205 Low Temperature Vacuum Evaporator Tubular Climbing Film Evaporator

Vacuum Low Temperature Tubular Type Film Rising Climbing Film Evaporator Machine

Vacuum Low Temperature Tubular Type Film Rising Climbing Film Evaporator Machine   is suitable for pharmaceutical, biological, food, chemical and other industries, commonly used for evaporation of Chinese medicine extract, juice, fine chemical solution, etc. However, it is not suitable for the solution with high viscosity, crystal precipitation and easy scaling.

Vacuum Low Temperature Tubular Type Film Rising Climbing Film Evaporator Machine working principle:

The feed liquid enters into the tube from the bottom of the heater body, and the heating steam transfers heat and condenses between the tubes, and transmits heat to the feed liquid in the tube. When the feed liquid is heated and boils, it vaporizes rapidly.

The secondary steam and feed liquid generated rise rapidly in the tube. Under vacuum condition, the secondary steam velocity at the outlet of the tube can reach 100-160 M / s. The concentrated solution is driven by the secondary steam rising at a high speed and is heated and evaporated continuously along the inner wall of the tube. In this way, the feed liquid is gradually concentrated from the bottom of the heater to the outlet at the top of the pipe.

The concentrated liquid enters the evaporation separation chamber at a higher speed, and is separated from the secondary steam under the centrifugal force.

The secondary steam is discharged from the top of the separation chamber. One part of the concentrated liquid passes through the circulation pipe, and then enters the bottom of the heater body, and continues to concentrate.

The other part of the concentrated liquid reaches the concentration degree, which can be from the separation chamber. Bottom out. There are also feed after a concentration, to the concentration of the finished product and discharged.

Vacuum Low Temperature Tubular Type Film Rising Climbing Film Evaporator Machine  Structural features:

1. The equipment is mainly composed of heater, separator, defoamer, condenser and other parts.

2. The long row tube heater is used. When the material is evaporated in the tube, it is driven by the secondary steam to rise in a film shape, which quickly evaporates the liquid phase, thus shortening the residence time of heating. The primary evaporation meets the concentration requirements and strengthens the evaporation effect. It is an efficient continuous evaporator.

3. The key to the normal operation of the rising film evaporator is to make the liquid materials form a continuous liquid film on the pipe wall. If the steam speed is too fast, the liquid film on the heating pipe will be partially dried, scabbed, scaling and other abnormal phenomena.

4. Vacuum decompression operation is adopted, the evaporation temperature is low and the speed is fast, and the configuration of each instrument valve is reasonable and convenient for operation.

5. The internal and external precision polishing of the equipment meets GMP requirements.

6.vacuum low temperature tubular type film rising climbing film evaporator as the strcture can be devided in to 

6.1 single effect  Film Rising Climbing Film Evaporator Machine

6.2  double effect Film Rising Climbing Film Evaporator Machine

6.3 tri-effect Film Rising Climbing Film Evaporator Machine

6.4 multi-ple Film Rising Climbing Film Evaporator Machine

Vacuum Low Temperature Tubular Type Film Rising Climbing Film Evaporator Machine  working principle:

The feed liquid enters into the tube from the bottom of the heater body, and the heating steam transfers heat and condenses between the tubes, and transmits heat to the feed liquid in the tube. When the feed liquid is heated and boils, it vaporizes rapidly.

The secondary steam and feed liquid generated rise rapidly in the tube. Under vacuum condition, the secondary steam velocity at the outlet of the tube can reach 100-160 M / s. The concentrated solution is driven by the secondary steam rising at a high speed and is heated and evaporated continuously along the inner wall of the tube. In this way, the feed liquid is gradually concentrated from the bottom of the heater to the outlet at the top of the pipe.

The concentrated liquid enters the evaporation separation chamber at a higher speed, and is separated from the secondary steam under the centrifugal force.

The secondary steam is discharged from the top of the separation chamber. One part of the concentrated liquid passes through the circulation pipe, and then enters the bottom of the heater body, and continues to concentrate.

The other part of the concentrated liquid reaches the concentration degree, which can be from the separation chamber. Bottom out. There are also feed after a concentration, to the concentration of the finished product and discharged.

1. Polishing:
   Polishing is vital for tanks. Tanks should be polished wholly inside and outside.
   Therefore it can ensure there is no place for the bacteria to hide in tanks.
   Our polishing system consists of auto and semi-auto polishing machine and manual polishing.
   Each tank is polished three times and more polish for the key place.
2. Welding:
   Our argon central system for welding provides 100% pure argon to protect tanks from distorting during welding

Why choose us:

1.Humanized overall layout of water-proof platform , convenient operation and nice appearance.
2.All types of emulsifying systems are easy to remove and maintain.
3.All types of emulsifying systems can be customized by the requirements of customers,with even division, safe and reliable
mechanical seal;
4.HMM automatic operating system, transparent,various and brand-new controlled components;
5.The product production can save more energy and production time,which can completely improve t production efficiency;
6.Can be coordinated the CIP/SIP system to reduce the water, electricity and other energy consumption;
7.This kind of product has wide usage, which can be used for the production and processing of all kinds of products

8.through our perfect design,manufacturing and after-sale service,ensure that the production the effective use period.

9.Give full play the design performance indicators.

10.Offer you from technical design to equipement manufacturing and installation and debugging integration service.

FAQ:

1.What about your factory?

Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.

2.How will your company control the equipment quality ?

We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .

3.How long the warranty will be?

We provide 1 years warranty for the machine running ,but we will afford whole -life service for the machine .

4.Which kind payment do your company do now ?

We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.

5.Can we become your distributor in our country?

Yes, we very welcome you! More details will be discussed if you are interested in being our agent.

6.Why we choose "JOSTON "?

1. We enhance the reliability of product's quality and working life .

2. We decrease the consumption cost of the product in the ruuning.

3. We improve research personnel's ability to deliver a creative design;

4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.

7.Do you supply installation equipment in oversea?

Yes, if need, we can send our engineer to your plant to help you do installation and commission.

8.Do you supply installation equipment in oversea?

Yes, if need, we can send our engineer to your plant to help you do installation and commission.

9.How can we know the order production status ?

We will arrange the person to take photo or video during manufacturing in every week to make you to know the production status.When goods are finished,we will take detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here

10.hat is kind service do you offer before making order ?

1.according to your company URS ,we will make the design drawing accoridingly.

2.after your company approved drawing ,we will make quotation.

3. final we make agreement on payment terms ,delivery time ,package ,shipment etc.

11.how about your company after-sale serivce ?

1. We provide long-term after-sale service.

2. we can do installation and commission for the equipment in your plant if necessary .

3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.